Best Ways To Clean a Hot Tub

The Best Ways To Clean a Hot Tub

Being the owner of your own hot tub is of course something that lots of people want to do assuming we don’t by now. Even though it is something that may offer you many years of soothing leisure it can also be something that requires a small amount of work to maintain.

The truth is, whichever brand of jacuzzi or spa you have you are going to sooner or later find it necessary to clean it.

Hot tub dirty water

5 Steps to Clean Your Hot Tub

This is actually a very easy undertaking all the same I wanted to provide you information on how you can easily clean your hot tub in 5 simple steps so that you will have absolutely no difficulties accomplishing this on your own.

To completely clean a hot tub with any modicum of being successful, it will need to be empty. But, there’s one step which requires there to be water in the spa.

Considering that as time passes the unit’s plumbing conduits can accumulate buildup, it’s important to administer a product that flushes the lines. Not so uniquely known as line flushes, these types of products are easy to find for purchase via the internet or simply at your nearest pool supply store.

Hot Tub and Pergola

Individual products get the job done a little differently, but usually, line flushes are added in, in a specified quantity, to the hot tub when running. Then, after the suggested amount of time has passed, drain the spa as per the manufacturer’s instruction manuals.

Be ready for a large amount of gunk to come out! When you need to, add more line flush routinely to reduce build-up.

Spray Down Your Spa with Hose

With the jacuzzi empty, proceed to spray down its the inside surface areas with a jacuzzi cleaning product. Note that plenty of household cleaners, for example Windex and Soft Scrub, quite often can be applied as a substitute. Nonetheless to be on the safe side, double-check with the spa manufacturer that it’s OK to use an all-purpose cleaner.

After spraying, scrub down the jacuzzi with a soft towel, and thus getting rid of the cleaner residue that, left in place, would certainly in the future cause the water to foam. Clean the hot tub cover the same way, wiping it down with a small towel when complete.

Hot Tub Filters

Replace or Clean Your Spa Filter Systems

Next, remove the spa filters. Being made to remove grime and grit from the water, these kinds of filters fairly quickly accumulate debris. If yours are fairly new, simply just spray them down with a garden hose, go over them with spa cleaner, and rinse out. If you haven’t switched out the filters in a year, replace them.

Fill Your Spa with Water

It’s time for you to fill up the jacuzzi. Your manufacturer’s instructions will likely say otherwise, but with most designs, it’s as simple as placing a yard hose into the filtration system well. Once full, start the hot tub and put in the chemicals that will constitute your traditional water treatment program. Finally, cover up your clean hot tub and permit time for the water to equalize over the next twelve hrs or so.

Hot Tub Chemicals

Add Jacuzzi Chemicals

Having allowed more than enough time to elapse, go back to the jacuzzi and check its chlorine level. Optimally, there would be between 1ppm and 3ppm of free chlorine (or bromine, depending on your choice). On the other hand, the pH should be within the range of 7.2 to 7.8. Increase chemicals when you need it to correct.

Hopefully this list of 5 steps to clean your hot tub make it easier for you when the time comes for you to think about doing some hot tub maintenance.

I hope you agree, washing your jacuzzi actually is as simple as 1-2-3, only with a 4 and a 5 tossed in.

Be Sociable, Share!



Leave a Reply